 | | |
| Products | Introduction | Select | | | Controller Card | | CC-1394-VIA | VIA IEEE1394 3+1 w/Cable, Bestek Pack
IEEE 1394 compliant
Compliant with 1394-1995 standard for High Performance Serial Bus and 1394a supplement ver.4.0
Compliant the data rate transfer up to 100/200/400Mbps
Compliant with 1394 OHCI specification v1.0 & v1.1
Compliant with PCI specification v2.2 & v1.1
Fully support play and plug
Supported by Microsoft Window 98/ME/XP/2000 and MacOS 9.0 operating System
|
| | | | Controller Card | | CC-VIA12-4 | VIA USB2.0 4+1 Ports, Bestek Pack
Revision 2.0 & 1.1
Data transfer rate can be 1.5/12/480Mbps
Compliant with OHCI Specification for RSB Rev.10a
Downstream port can handle speed (480Mbps), full-speed(12Mbps) and low-speed(1.5Mbps)
32-bit 33MHz host interface compliant to PCI Specification release 2.2
Support PCI-Bus Power Managerment Interface Specification release 1.1
Supports up to 127 devices (USB controller card only)
Supports devices hot swap and wake-up |
| | | | Controller Card | | CC-1394USB-VIA
| VIA IEEE1394+USB2.0 Combo, Bestek Pack
Revision 2.0 & 1.1
Data transfer rate can be 1.5/12/480Mbps
Compliant with OHCI Specification for RSB Rev.10a
Downstream port can handle speed (480Mbps), full-speed(12Mbps) and low-speed(1.5Mbps)
32-bit 33MHz host interface compliant to PCI Specification release 2.2
Support PCI-Bus Power Managerment Interface Specification release 1.1
Supports up to 127 devices (USB controller card only)
Supports devices hot swap and wake-up (USB & 1394 contoller cards)
IEEE 1394 compliant
Compliant with 1394-1995 standard for High Performance Serial Bus and 1394a supplement ver.4.0
Compliant the data rate transfer up to 100/200/400Mbps
Compliant with 1394 OHCI specification v1.0 & v1.1
Compliant with PCI specification v2.2 & v1.1
Fully support play and plug
|
| | | | Controller Card | | CC-Scombo-VIA | SATA 2 Ports+USB2.0 4 Ports PCI Combo VIA
Features:
Easy plug-n-play connectivity and set-up
USB 2.0 data transfer rate up to 480 Mbps, SATA data transfer rate up to 150 MBps
Supports Windows 98SE, ME, 2000 and XP
System Requirement:
IBM–Compatible PC with 400MHz or faster processor
Microsoft Windows 98SE, Windows ME, Windows 2000 or Windows XP
Available PCI slot
CD-ROM drive
Specification:
SATA Interface:
Compliant with Serial ATA 1.0 specifications
Compliant with PCI specification Rev. 2.2
Supports RAID Level 0/RAID Level 1/JBOD
Dual channel master mode supports up to two SATA
Up to 150 Mbps maximum transmission rate for SATA
USB2.0 Interface:
USB 2.0 Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/12/480 Mbps)
All USB ports can handle high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) transaction
Support up to 127 devices
Support devices hot swap and wake-up
2.5Watt (5V, 500mA) per port
Ports:
Four external USB ports
Two internal SATA ports
|
| | | | Controller Card | | CC-ATA-S3-I1-B | SATA 3PORTS+IDE PCI Card VIA 6421 with BOIS
Spec:
Chipset: VIA 6421( bois set up )
SATA 1.0:
Compliant with serial ATA 1.0 specification
Compliant with PCI specification Rev. 2.2
Supports all UDMA and PIO modes
Supports ACPI
Dual independent DMA channels
Data transfer rate: up to 1,500MB/sec
ATA 133:
Compatible with ATA/ATAPI-6 specifications
Supports the scatter/gather function for the DMA/UDMA function
Supports PCI power management V1.0 to reduce power consumption
Supports raid 0, 1, 0+1 (optional) |
| |   |
|
| | | | | | Powered and designed by
Tradeeasy All rights reserved. |
|